Colored Laser Engraving Marking Paper for CO2 Fiber UV Laser Engraver Machine Tools for Ceramics Glass Crystal Stone Tiles

Colored Laser Engraving Marking Paper for CO2 Fiber UV Laser Engraver Machine Tools for Ceramics Glass Crystal Stone Tiles

Attation please, it cannot be used on any metal surface, like aluminum, stainless steel, iron etc.

Why You Need It

Direct engraving on glass, ceramics, etc. may failed and cannot be coloured, while laser engraving colored paper is the perfect solution for those issues.

Attention Please

Color engraving has high requirements on laser and system parameter settings. For fiber laser, diode laser, UV laser and CO2 laser engravers, the CO2 Laser engraving machine works best. As different lasers, different materials and different colors of engraving paper require different parameter settings, we can’t give users specific parameter values. Users need to adjust the parameters through testing to get good engraving results. If you are not very professional, we suggest you buy the black one to try first, becuase black is easy to color.

Compatibility

Compatible with almost of laser engravers, like
CO2 Laser Engraver Machine
Fiber Laser Engraver Machine
UV Laser Marking Machine
Diode/ Semiconductor Laser

About Colors

Some colors may be changed after laser engraving, so the paper color looks like different from the true color, we will remark ture color on the back, please subject to marked color.

About Quality

All colored carved papers will be well packed, but due to long time international shipment, some slight creases or air lines may cuased, please do not worry, it is not quality issue, and won’t affect the engraving.

Custom Size

With big size, you can cut size as you need.
Backing paper : 39cm x 27cm(15.35″ x 10.63″)
Colored paper: 36cm x 24cm (14.17″ x 9.84″)

How to Use?

Please check videos or following images.

Step 1: Distinguish the Front Side

The color upward for the front, when sticked need to keep the front upward.

Step 2: Cutting Color Paper

Cut the right size according to the content of the engraving.

Step 3: Soaking Color Paper

Put the cut color paper into water and wet it for 1-2 minutes. Peel the colored paper from the backing after soaking.

Step 4: Stick on the Object

Please keep the front upward and use a scraper to remove air bubbles and creases. It is necessory to buy a scraper together. Please dry the colored paper with hair dryer before engraving.

Step 5: Prepare to Engrave

Place the object on the engraving machine and select the engraving pattern. Pay attention to the direction of the pattern, you may need to flip the pattern if engrave it horizonltally.

Step 6: Start Engraving

Waiting for the engraving process to be completed.

Step 7: Soaking Color Paper

Soak in water for 5 minutes after the engraving is completed. Full soaking helps to peel off excess colored paper easily.

Step 8: Remove Excess Color Paper

Take out the soaked object and remove the excess color paper patiently.

Step 9: Product Display

DIY as you like.

Compatibility

Compatible with almost of laser engravers, like
CO2 Laser Engraver Machine
Fiber Laser Engraver Machine
UV Laser Marking Machine
Semiconductor Laser