LT-K30 Features:
1. Ultra High Power
LaserTree K30 is a true 30W+ output optical power laser engraving and cutting module. It uses beam compressed technology to combine six 5.5W laser diodes into a powerful laser beam with 30W+ laser power.
2. Powerful Cutting Ability
15mm basswood plywood: 180mm/min, one pass
15mm black acrylic: 35mm/min, one pass
20mm pine wood: 120mm/min, one pass
9mm MDF: 300mm/min, 2 passes
3. Built-in Air Assist Airway& Dual Fan Cooling Design
1>Built-in air assist airway to get clean-cut edges, improve cutting performance.
2>Excellent heat dissipation makes the laser module maintain a stable cutting ability and prolong service life.
4. Working Status Indicator
The electrical connection status can be easily checked by the “Power” and “Signal” LED indicator.
5. Temperature Display & Alarm Function
Excessive working temperatures can reduce the life time of the laser head at an accelerated rate.
LaserTree K30 create a solution with working temperature display,so that you can check the internal temperature of the module easily. When the working temperature of laser module over 55 ℃, it will sound an alarm through the buzzer.
6. Red Cross Line Locating
The working frame can be positioned by red crosshair, it is helpful for improving the convenience of the secondary cutting and engraving as well.
7.Super Fast Egraving Speed
3 times engraving speed compare with 10W laser power module.
8. Copper Core Protection Lens.
Easy to clean and replace when the lens is contaminated or dusty.
9. Laser View Window
Anti-blue light view window with optical glass material, protective your eye from blue light, no fear of fiames.
10. Widely Compatible Design
In order to improve the compatiblity to different laser engraver machine, K30 provide a solution by adapter board for electric compatibiliy, and sliding plate with multi holes for installation compatibility.
LT-K30 laser module can be installed on Z*aitu,O*tur,Tw* Trees,S*ulpful9, Xtool, A*omstack and other models of DIY laser engraving machines.
(please contact us if you are not sure about compatibility)
LT-K20 (Optical Power 20W) Features:
1. Ultra High Power
LaserTree K20 is a true 19-21W output optical power laser engraving and cutting module. It uses beam compressed technology to combine 4pcs 5W laser diodes into a powerful laser beam with 20W laser power.
2. Powerful Cutting Ability
12mm basswood plywood: 100mm/min, one pass
15mm black acrylic: 15mm/min, one pass
15mm pine wood: 100mm/min, one pass
9mm MDF: 100mm/min, 2 passes
3. Built-in Air Assist Airway & Dual Fan Cooling Design
1>Built-in air assist airway to get clean-cut edges, improve cutting performance.
2>Excellent heat dissipation makes the laser module maintain a stable cutting ability and prolong service life.
4. Working Status Indicator
The electrical connection status can be easily checked by the “Power” and “Signal” LED indicator.
5. Temperature Display & Alarm Function
Excessive working temperatures can reduce the life time of the laser head at an accelerated rate.
LaserTree K20 create a solution with working temperature display,so that you can check the internal temperature of the module easily. When the working temperature of laser module over 55 ℃, it will sound an alarm through the buzzer.
6.Red Cross Line Locating
The working frame can be positioned by red crosshair, it is helpful for improving the convenience of the secondary cutting and engraving as well.
For Cutting
Please make the focus locate lower than the cutting material surface.
For example, if you want to cut 10mm material, the focus should be 5mm lower than material surface, please adjust the fixed focus lever to 5mm.
LT-80W-AA-PRO Features:
1.LT-80W-AA-Pro
It has an upgraded nozzle compared to the previous LT-80W-AA. The difference of this nozzle is that it has an advanced hydrodynamic design that makes better use of air pressure. When using the same air compressor, the upgraded version has a faster jet airflow.
2.With the Air Asssit Nozzle
The laser head comes with a specially designed air assist nozzle. When cutting with this laser head, the air assit system will blow air through the air nozzle. That will bring you excellent cutting experience and greatly reduce burned marks.
Air pump suggestion: Air pressure and capacity: ≥0.027kPa, 27L/min
3. Remarkable Cutting Ability
Cutting 8mm bass plywood ,120mm/min ,one pass.
Cutting 5mm bass plywood, 50mm/min, one pass.
Cutting 5mm MDF by 2 passes, 150mm/min , 2 passes.
4.With the Laser Protective Cover
Comes with a removable protective cover. Whether engraving or cutting, use this shield to filter blue light and work without laser glasses, convenient and fast. It’s also easy to remove if you don’t need it.
5. Widely Compatible Design
LT-80W-AA-Pro laser module can be installed on Z*aitu,O*tur,Tw* Trees,S*ulpful9, Xtool, A*omstack and other models of DIY laser engraving machines.
(If you are not sure if it is compatible, please send us a picture of your machine’s contro board, we will provide you with a connection diagram.)
LT-40W-AA Features:
1. Optical power is 5W (±0.5W), electrical power is 12V (1.5A-2A).
2. It can cut through 4mm plywood by one pass, the speed is 190mm/min, 100% power.
3. High precision engraving resolution 0.08mm.
4. With air assist, when performing laser cutting operations, the air assist system blows air through the air nozzle to remove dust and debris to improve cutting performance and reduce burn marks, and can also prevent the dust and debris generated during the cutting process from contaminating the optical lens and lens surface , thereby increasing the service life of the lens.
5. Upgraded Magnetic eye protective cover, easy to remove and install.
Large Airflow Air Assist Pump:
LASER TREE Air Pump equipped with adjustable airflow of 0-30L/min. Large and steady output airflow can blow away the smoke and dust generated during laser cutting. Prevent smoke and dust from attenuating laser energy, and increase the lifespan of the laser module lens. Help cut faster cleaner and deeper.
Get Clean Surface and Smooth Edge:
Powerful air assist pump’s airflow quickly reduces the surface temperature of cutting objects, preventing distortion and discoloration due to excessive burning and making the cutting edge smoother and cleaner.
LT-AP-MP56 Features:
It
provides a steady and high-pressure flow of air to blow away the
smoke,which is very hot and may make the workpiece turn yellow. Help you
get better work. In addition, it can improve the efficiency of laser
processing and thus save your time.Hopefully it’ll be a big surprise for
you.
High-quality materials: metal nozzle, resisting high temperature.
Large and steady air output: ≥26L/min, blowing away smoke and residue produced during laser processing
Super silent: little noise and vibration in operation.
Small in size: can be placed on desktop.
Easy installation: can be easily transformed and upgraded
Air output: ≥26L/min
Voltage：DC24V
Current: 950mA
Pressure: ≥28kPa
Environmental temperature: -20℃-40℃
Environmental humidity: <90%
Compatible with:LASER TREE (LT-40W-AA/ LT-80W-AA-PRO/ LT-4LDS-V2/ LT-K20/K30/K40/K60)
Reviews
There are no reviews yet.