LT-K60 Features:
1. Optical Power 60W+ Laser Module.
Built-in 12pcs 6W beam compressed laser diodes, which can provide up to 60W+ optical power to achieve fast and efficient cutting.
2. Powerful Cutting Ability.
20mm plywood：170mm/min ；1pass
40mm pine plywood : 50mm/min; 1pass
30mm black acrylic : 30mm/min; 1pass
9mm MDF: 400mm/min; 1pass
3.Alarm Function & Optical Power Switching.
Function 1：
When an over-temperature alarm occurs, press once can turn off the buzzer alarm sound
When the working temperature of the laser module is higher than 55’C, the buzzer will sound an alarm.
To get good power stability and durability, it is suggested to keep the module working temperature below 55°c and environmental temperature below 35°C.
Function 2：
The default power is 60W optical power, long press 5S to enter the power switching mode and switch to 40W optical power. Continuous short press can switch the optical power.
Optical power switching order：60W→40W→20W
4. Built-in Air Assist Airway & Dual Fan Cooling Design.
â‘ Built-in air assist airway to get clean-cut edges, improve cutting performance.
â‘¡Excellent heat dissipation makes the laser module maintain a stable cutting ability and prolong service life.
5. Red Cross Line Locating.
The bottom is equipped with a red cross positioning cursor (offset X: 0mm, Y: -21mm), which can quickly locate the starting point and ensure the accuracy of the secondary cutting operatio.
6. Easy to installation.
â‘ Integrated dovetail guide rail design, the guide rail length is 115mm, ensuring that the laser head can move smoothly, making it easy to adjust the height and focus position.
â‘¡In order to improve the compatibility to different laser engraver machine, K60 provide a solution by sliding plate with multi holes for installation compatibility.
7. Copper Core Protection Lens.
Easy to clean and replace when the lens is contaminated or dusty.
8. Laser View Window.
Anti-blue light view window with optical glass material, protective your eye from blue light, no fear of fiames.
9. Widely Compatible Design.
In order to improve the compatibility to different laser engraver machine, K60 provide a solution by adapter board for electric compatibiliy.
Engraving mode: small light spot for finer engraving.
Cutting mode: 60W+ high power cutting.
K60 Series-Three Optical Power Options
The use of MR30-M ports and rubber-coated wires greatly improves safety while being beautiful, and solves the problem of overheating due to excessive current.
LT-K40 Features:
1. Optical Power 40W+ Laser Module
Built-in 8pcs 5.5W+ beam compressed laser diodes, which can provide up to 40W+ optical power to achieve fast and efficient cutting.
2. Powerful Cutting Ability.
20mm bass plywood：100mm/min ；1pass
30mm pine plywood : 55mm/min; 1pass
30mm black acrylic : 15mm/min; 1pass
9mm MDF: 150mm/min; 1pass
3. Built-in Air Assist Airway & Dual Fan Cooling Design
â‘ Built-in air assist airway to get clean-cut edges, improve cutting performance.
â‘¡Excellent heat dissipation makes the laser module maintain a stable cutting ability and prolong service life.
4. Red Cross Line Locating
The bottom is equipped with a red cross positioning cursor (offset X: 0mm, Y: -21mm), which can quickly locate the starting point and ensure the accuracy of the secondary cutting operatio
5. Temperature Display & Alarm Function
â‘ Excessive working temperatures can reduce the life time of the laser head at an accelerated rate.
②When the working temperature of laser module over 55°C, it will sound an alarm through the buzzer.
6. Easy to installation
â‘ Integrated dovetail guide rail design, the guide rail length is 115mm, ensuring that the laser head can move smoothly, making it easy to adjust the height and focus position.
â‘¡In order to improve the compatibility to different laser engraver machine, K40 provide a solution by sliding plate with multi holes for installation compatibility.
The bottom is equipped with a red cross positioning cursor (offset X: 0mm, Y: -21mm)
LT-K30 Feature:
1. Ultra High Power
LaserTree K30 is a true 30W+ output optical power laser engraving and cutting module. It uses beam compressed technology to combine six 5.5W laser diodes into a powerful laser beam with 30W+ laser power.
2. Powerful Cutting Ability
15mm basswood plywood: 180mm/min, one pass
15mm black acrylic: 35mm/min, one pass
20mm pine wood: 120mm/min, one pass
9mm MDF: 300mm/min, 2 passes
3. Built-in Air Assist & Dual Fan Cooling Design
1>Built-in air assist to get clean-cut edges, improve cutting performance.
2>Excellent heat dissipation makes the laser module maintain a stable cutting ability and prolong service life.
4. Working Status Indicator
The electrical connection status can be easily checked by the “Power” and “Signal” LED indicator.
5. Temperature Display & Alarm Function
Excessive working temperatures can reduce the life time of the laser head at an accelerated rate.
LaserTree K30 create a solution with working temperature display,so that you can check the internal temperature of the module easily. When the working temperature of laser module over 55 ℃, it will sound an alarm through the buzzer.
6.Red Cross Line Locating
The working frame can be positioned by red crosshair, it is helpful for improving the convenience of the secondary cutting and engraving as well.
7.Super Fast Egraving Speed
3 times engraving speed compare with 10W laser power module.
8. Copper Core Protection Lens.
Easy to clean and replace when the lens is contaminated or dusty.
9. Laser View Window
Anti-blue light view window with optical glass material, protective your eye from blue light, no fear of fiames.
LT-K20 (Optical Power 20W) Features:
1. Ultra High Power
LaserTree K20 is a true 19-21W output optical power laser engraving and cutting module. It uses beam compressed technology to combine 4pcs 5W laser diodes into a powerful laser beam with 20W laser power.
2. Powerful Cutting Ability
12mm basswood plywood: 100mm/min, one pass
15mm black acrylic: 15mm/min, one pass
15mm pine wood: 100mm/min, one pass
9mm MDF: 100mm/min, 2 passes
3. Built-in Air Assist Airway & Dual Fan Cooling Design
1>Built-in air assist airway to get clean-cut edges, improve cutting performance.
2>Excellent heat dissipation makes the laser module maintain a stable cutting ability and prolong service life.
4. Working Status Indicator
The electrical connection status can be easily checked by the “Power” and “Signal” LED indicator.
5. Temperature Display & Alarm Function
Excessive working temperatures can reduce the life time of the laser head at an accelerated rate.
LaserTree K20 create a solution with working temperature display,so that you can check the internal temperature of the module easily. When the working temperature of laser module over 55 ℃, it will sound an alarm through the buzzer.
6.Red Cross Line Locating
The working frame can be positioned by red crosshair, it is helpful for improving the convenience of the secondary cutting and engraving as well.
7. Copper Core Protection Lens.
Easy to clean and replace when the lens is contaminated or dusty.
8. Laser View Window
Anti-blue light view window with optical glass material, protective your eye from blue light, no fear of fiames.
LT-AP-MP56 Features:
It provides a steady and high-pressure flow of air to blow away the smoke,which is very hot and may make the workpiece turn yellow. Help you get better work. In addition, it can improve the efficiency of laser processing and thus save your time.Hopefully it’ll be a big surprise for you.
High-quality materials: metal nozzle, resisting high temperature.
Large and steady air output: ≥26L/min, blowing away smoke and residue produced during laser processing
Super silent: little noise and vibration in operation.
Small in size: can be placed on desktop.
Easy installation: can be easily transformed and upgraded
Air output: ≥26L/min
Voltage：DC24V
Current: 950mA
Pressure: ≥28kPa
Environmental temperature: -20℃-40℃
Environmental humidity: <90%
Compatible with:LASER TREE (LT-40W-AA/ LT-80W-AA-PRO/ LT-4LDS-V2/ LT-K20/K30/K40/K60)
Reviews
There are no reviews yet.