Laser Cutting

This image shows our CO2 3.2Kw Trumpf Laser machine Oxygen cutting 3mm XF350 steel. These parts destined for the automotive and heavy goods sectors are later pressed to form. The use of this specialised material ensures that accuracy of repeatability is consistent at such volumes. This image shows our CO2 3.2Kw Trumpf Laser machine Oxygen […]

Not only do we offer Laser cutting in both Flatbed and Five axis methods with state of the art machines, but we also operate an in-house  Press Braking department. Consisting of currently three Amada ‘best of breed’ machines , with a maximum bend length of 4.2metres and 220 tonne capacity, we offer folding to meet

Shown within this image is a completed batch of laser cut blanks awaiting the next stage of manufacture. These 2mm thick parts, cut from readily available CR4 material on our diverse range of Trumpf Laser machines with Oxygen gas, are now awaiting the folding process. Not only providing strength, but to create the final required

This image shows the results of our Trumpf 3030 Fibre 4kw machine cutting 20mm thick mild steel material. The results speak for themselves. With the addition of Brightline, which by use of a different nozzle design allows for improved gas shielding and greater beam control when cutting, result in a much smoother cut and in

Here pictured we have the final highly visible look of Oxygen laser cut 20mm thick mild steel parts produced on our 3030 Fibre 4kw Trumpf laser machine. As these have been processed under the additional ‘Brightline’ settings and nozzle designs on our state of the art machine by our highly experienced laser setter, the overall

we have a selection of parts fresh off our latest investment, a Trumpf 5030 Fibre five axis laser machine. At time of install this cutting edge machine was the very first in the UK. Bringing increased capability and the latest in technologies to ensure only the very best parts produced. The parts pictured, which are

Most of us in manufacturing and laser cutting will remember 2008 as being a torrid time, I can recall a number of our customers shutting their doors for good and those that remained reduced their requirements dramatically or worked a four day week. Most of us didn’t think we’d face another year like it, how

shown here is a precision laser cut part from 10mm thick 6082 aluminium! Produced on our state of the art Trumpf 4kw L49 fibre laser using Nitrogen cutting gas from prime sheet material, the finish straight from machine seen here is something that with older technologies cut not have been achieved. By investing in the

Shown in this image is a freshly completed batch of processed form tube. Done on our latest investment in Trumpf fibre technology and the first 5030 4kw fibre laser cell in the country, these parts are destined for use on a very well known brand in the yellow goods sector! From our customer’s free issue

The post March Laser Cutting appeared first on Laser Cutting. Source link