Ultrafast photoacoustics enables optical diagnostics of opaque materials

In an advance for photonics, a group of researchers from Delft University, the Advanced Research Center for Nanolithography, and ASML Research in The Netherlands recently had a little fun with physics and created an optical metrology approach that listens with light and sees sound to achieve nanometer-level alignment metrology through optically opaque layers.

A key part of manufacturing integrated circuits (ICs) involves lithography and wafer alignment. And while optical methods are fast and noninvasive, the increasing use of optically opaque materials makes optical metrology more complex on markers within deeper layers.

The researchers’ approach taps an ultrashort (picosecond) light pulse to generate ultrasound within the optically opaque layer, which propagates to the imaging target below. This ultrasound pulse bounces off the target, and its reflection can be detected at the top of the opaque material by another light pulse. 

While the group has used this trick before, now they’ve demonstrated it on an alignment grating covered with a 1.3-µm-thick layer of amorphous carbon—and achieved 15-nm positioning reproducibility within 1 second. More good news: It shows potential for further scaling.

It’s an advance for photonics because “it significantly expands the application range of optical metrology by enabling all-optical measurements through optically opaque materials,” says Stefan Witte, a professor of optics for nanoscale metrology at Delft University. “For many applications, including semiconductor metrology, the speed and noninvasive, noncontact nature of optical measurements are essential.”

Witte and colleagues view the optics and imaging science field as an enabling technology. “It provides the tools for many applications in science and industry,” Witte says. “The semiconductor industry is one application area in which optics is really pushed to its limits to make smaller and more intricate electronics. It’s an exciting field to be in, and we collaborate with industry on various projects related to metrology tools for positioning and characterization—this work is the result of such a collaboration.”

Visualize microscopic structures covered by optically opaque materials

The main measurement concepts behind the group’s approach involve ultrafast pump-probe spectroscopy and point-scanning microscopy. “We wanted to create an optical measurement method to allow visualization of microscopic structures covered by layers of optically opaque materials,” says Witte. “And the main physics concept involved is ultrafast heating. The pump pulse is absorbed by the opaque material, which causes a rapid temperature increase of a thin layer at the surface. This rapid heating causes stress, which results in the formation of a rapid expansion/strain wave—it’s effectively an ultrasound pulse that propagates into the structure and can reflect from the structures and interfaces it encounters.”

When such a reflected strain pulse returns to the surface, “it transiently changes optical properties such as reflectivity,” he explains. “By measuring this reflectivity with a time-delayed probe pulse, we can detect the ultrasound pulses. Our approach can be used as an imaging tool by tightly focusing pump and probe spots and performing consecutive measurements at different positions across a sample.”

What does the setup involve?

The group’s setup is a pair of modelocked femtosecond fiber lasers from Menlo Systems—a Yb-doped fiber laser at 1030-nm wavelength as the pump, and a frequency-doubled Er-doped fiber laser at 780 nm as the probe. “For time-resolved measurements, we electronically synchronize these lasers to control their relative pulse repetition frequencies,” says Witte. “This approach is known as asynchronous optical sampling (ASOPS) and it makes the time scanning fast and stable.”

For measurements, the researchers use the pump pulse to launch an ultrasound pulse into a sample, and then record the probe pulse reflectivity as a function of the pump-probe time delay. “Any ultrasound reflections from hidden features inside the sample are detected as rapid transient reflectivity changes, in which the time delay encodes the depth of such a hidden feature,” he points out. “By performing such measurements while also scanning the laser spots across the surface, we can record a spatial map of the hidden features.”

For more practical metrology, scanning across a known grating-like target, “we actually fix the pump-probe delay to the correct timing and do a spatial scan across the target to ‘see’ the grating lines. So you can say we’re actually listening with light—or seeing the sound,” Witte says.

Source link

Leave a Comment

Your email address will not be published. Required fields are marked *

Shopping Cart
Scroll to Top